DIY Car Glass

Not much compares to the shock and anguish of having a rock or other projectile hit and chip your windshield. Chips are among the most common windshield damage problems. Before the chip forms into a crack, you can fix it with a simple windshield chip repair kit. This job is best done in the sunlight because the sun helps cure the repair compound after you have eliminated the chip.

Instructions

1

Clean the damaged area with glass cleaner. Let it completely dry; this takes roughly 10 minutes, depending on the temperature. Place a towel or rag under the damaged area to ensure you don't spill any repair compound onto the paint.

2

Push the hole out of your adhesive disc. The hole should already be started by the manufacturer, so the hole can be made easily by simply pushing out the plastic in the center. Peel off the backing and press it against the glass. Position the hole over the damaged area. Point the tab up.

3

Peel off the backing from the top side of the disc. Press the pedestal onto it. Ensure the tabs align at the top.

4

Pull the cap off the syringe. Insert it into the pedestal. Twist the syringe until it is seated. Pull the plunger to suck out the air. Hold it there for a moment then push in to force your compound into the crack. Repeat 10 times.

5

Allow the windshield to sit in the sun for at least 30 minutes to cure the compound. Enter your vehicle and check for any air bubbles. Repeat the process if necessary.

6

Remove the syringe. Cut the disc and pedestal with a knife and wipe off any remaining compound.