How to Replace the Windshield on a Mitsubishi

Mitsubishi is a community of independent companies. Over the years, Mitsubishi has grown to include high-quality model cars mostly known for their powerful motors. If it should happen that the windshield becomes cracked or damaged beyond repair, the owner should contact his local Mitsubishi manufacturer to order replacement glass for his particular model. Do-it-yourself windshield replacement can save the owner money. With a few tools and an assistant, glass windshield replacement can be done without seeing a body mechanic.

Instructions

1

Contact Mitsubishi to order a replacement windshield that fits the vehicle's model. Locate a parts dealer or a Mitsubishi dealer in your area.

2

Put on safety glasses as well as utility gloves to protect yourself from broken glass and hazardous chemicals.

3

Dismount the mirror from inside the vehicle's windshield. Use a small Phillips screwdriver to remove the screws that secure the mirror to the glass. Slide a flathead screwdriver underneath the mirror's base. Pry the base up to dislodge it from the glass. If it is difficult to remove, slide a thin razor blade underneath the base so that it will cut at the adhesive. Set the mirror aside.

4

From outside the Mitsubishi, use a carpet knife to slice around the window's inside molding adhesive. Conduct the cutting smoothly, slicing around the perimeter at a steady pace.

5

Have an assistant go inside the vehicle to push up on the glass with pressure. Use both hands to push on the glass so that it dislodges itself from the adhesive seal holding the windshield to the frame. Catch the glass from the outside so it does not fall and break.

6

Add mild soap and water to a thick sponge to clean away gunk and sticky adhesive buildup from the frame.

7

Before replacing the glass windshield, apply a bead of urethane caulk on the inside of the window frame. Have your helper set the glass in place by gently inserting the new glass into the threshold. Once again, apply pressure on the outside of windshield by pressing all your weight on it so that it makes an airtight seal.

8

Allow the urethane caulk to cure for 24 to 48 hours. Remount the mirror with a rearview mirror adhesive, which can be purchased from an auto parts store.