How to Change the Brake Rotors on a 2002 Honda Odyssey

Honda Odyssey brake pads are equipped with a simple device that warns you when the brakes need service. However, it is a good idea to visually inspect the brake pads to get an accurate view of the condition. If the brake pads wear beyond the recommended level, the rivets will eventually start cutting into the rotors, causing significant damage.

Instructions

1

Place the wheel chocks behind the rear tires, and jack the Honda up with the automobile jack. Place a jack stand under the Odyssey, and raise it up to the frame of the vehicle.

2

Remove the wheel with a lug wrench. Remove the brake caliper, using a socket and ratchet to loosen the bolts. Secure the caliper to the strut with a wire tie. Remove the caliper bracket mounting bolts with the socket and ratchet, and pull the bracket off of the wheel assembly. Remove the rotor retaining screws, and slip the rotor off of the wheel.

3

Put the new rotor on the wheel, and install the retaining screws, using the screwdriver. Reinstall the caliper bracket. Tighten the bolts with the socket and ratchet. Attach the brake caliper, and tighten the retaining bolts with the socket and ratchet.

4

Put the wheel on the car, and tighten the lug nuts with the lug wrench. Remove the jack stand from under the Honda, and lower the car to the ground. Repeat the process on the other wheel.