How to Remove the Front Brake Rotor From a 2003 Acura Tl

The front brake rotors on a 2003 Acura TL are mounted to the drive wheels and are responsible for slowing down the vehicle. Over time, the rotors can wear down from constant use until eventually they can crack and fail. If that happens, you may have a severe brake failure. Before that happens, it's recommended that every time you change your brake pads you remove your brake rotors at the same time and have them either resurfaced or replaced.

Instructions

1

Lift the front of the Acura using the jack until the front wheels are off the ground. Place jack stands under the front of the chassis and lower the Acura onto the stands, making sure the weight of the car is supported fully and the wheels are still off the ground. Remove the front wheels with the tire iron.

2

Unbolt the brake caliper that is mounted around the rotor using the 3/8-inch ratchet and socket. Lift the caliper off the rotor and suspend it from the vehicle's fender well using the mechanics wire.

3

Unbolt the brake caliper mounting bracket from the front steering knuckle using the 3/8-inch ratchet and socket.

4

Place the head of the impact screwdriver onto the retaining screws on the center of the brake rotor. Strike the end of the impact screwdriver with the hammer while twisting the screwdriver to the left. Remove the screws and pull the rotor off the wheel hub.