How to Replace the Brake Pads on a Mitsubishi Lancer
The Mitsubishi Lancer is manufactured with a hydraulically operated caliper braking system that requires routine pad maintenance. Replacing ...
The Mitsubishi Lancer is manufactured with a hydraulically operated caliper braking system that requires routine pad maintenance. Replacing worn or damaged pads ensures safe braking and can prevent damage to other brake components. The average backyard mechanic can replace the brake pads on a Lancer in about half an hour per wheel.
Instructions
Replacing the Brake Pads on a Mitsubishi Lancer
- 1
Raise the car near the wheel, and place it onto the jack stands with the floor jack. The jack stands should be positioned on the frame, not the suspension parts.
2Remove the wheel at the brake that is to be repaired by turning the lug nuts counterclockwise. Place the wheel away from the car.
3Turn the twin rear mount bolts on the caliper in a counterclockwise direction, then slide the caliper off the rotor.
4Replace the two pads on the caliper by pulling them free of the caliper pistons, then positioning two new pads in their place. The new pads will rest in place but will not be secured to the pistons.
5Slide the caliper back onto the rotor, then turn the rear mount bolts clockwise until they are snug.
6Replace the wheel by turning the lug nuts in a clockwise direction, in an alternating pattern.
7Repeat steps 1 through 6 on the remaining brake pads.
8Lower the Lancer from the jack stands.