How to Fix a Broken V-Belt

The V-belts on an engine are powered by the crankshaft pulley. V-belts engage the pulleys of various engine components and cause them to operate. On most vehicles these belt-driven components include power-steering pumps, alternators and water pumps. Some engines also incorporate belt-driven air pumps and air-conditioner compressors. A broken V-belt must be replaced, as no sufficiently durable repair to the belt is possible.

Instructions

1

Raise the hood of your vehicle and locate the component that was driven by the V-belt. Inspect the pulley and ensure there are no burrs on it that could damage the new V-belt. If any are found remove them with the file.

2

Locate the adjustment bolt for the component and loosen it with the wrench. Turn it counterclockwise to loosen. Do not remove the bolt completely. Push the component in, toward the engine. This allows the new V-belt to fit over the pulleys.

3

Place the new V-belt over the component's pulley and the crankshaft pulley. Pry outward on the component so that the belt is tight. Tighten the adjustment bolt by turning it clockwise with the wrench.