How to Remove Honda Odyssey Rear Caliper Pads

The Honda Odyssey rear caliper pads are secured into the brake caliper with tabs that are integrated into the pad assembly. When the brake pads, also called brake linings, wear out on the pad, you'll need to replace the unit with a new brake pad. However, removing the pad from the caliper can be a bit tricky. Once you have the Odyssey off the ground and the wheel off, it's time to remove the pads from the caliper assembly.

Instructions

1

Locate the caliper pin bolt. This bolt is a small, 10 mm, bolt on the bottom of the caliper that secures the caliper to the caliper bracket. The pin bolt is the bottom-most bolt on the caliper. To get the pads out, you need to remove this bolt. Turn the bolt counterclockwise to remove it.

2

Remove the two 14 mm caliper mounting bolts on the top and bottom of the caliper.

3

Slide the caliper off the brake rotor.

4

Swing the caliper bracket open from the bottom of the caliper. The brake pads should come out with no trouble.