How to Convert an S10 to Bi-Xenon

The GM S10 trucks come equipped with traditional halogen bulb assemblies for all of the exterior lights. If you want to install Bi-Xenon headlights, you must replace the halogen assembly with a Bi-Xenon assembly. Bi-Xenon headlights are much brighter than halogen headlights. You can replace the assemblies in minutes, provided you have the appropriate tools for the job. You can buy Bi-Xenon headlight assemblies at most automotive parts stores or online.

Instructions

1

Open the hood of the S10 and use a socket wrench to disconnect the S10's battery.

2

Use a Phillips screwdriver to remove the screws securing the headlight assembly to the engine compartment of the S10.

3

Squeeze the plastic tabs on the electrical connector of the headlight assembly and remove it from the S10's engine compartment.

4

Place the replacement Bi-Xenon headlight assembly into the engine compartment and connect the wiring connector to the assembly.

5

Reinstall the screws to secure the assembly to the engine compartment. Reconnect the battery and close the hood.