How to Install Under-Dashes in Neons

The under-dash, also referred to as a kick panel or knee bolster, of your Dodge Neon is the lower portion of the dashboard that protects the...

The under-dash, also referred to as a kick panel or knee bolster, of your Dodge Neon is the lower portion of the dashboard that protects the electrical equipment from being inadvertently kicked. If the under-dash is damaged or needs to be replaced, you need to remove the old one before installing the new components. The under-dash is held in place by a few screws, but part of the dashboard needs to be removed before you can access the screws.

Instructions

    1

    Open the hood of the Neon and use a socket wrench to lift off the negative battery terminal. Wait five minutes for the airbags to deflate.

    2

    Remove the lower steering wheel column cover by using a Phillips screwdriver to take out its four securing screws. Pry the cover off with a flat-head screwdriver.

    3

    Remove the three black 8 mm screws from the glove box using a Phillips screwdriver. Remove the glove box.

    4

    Use a Phillips screwdriver to remove the four screws from the under-dash on the driver's side and then on the passenger's side. Once the screws are removed, pull the panels out of the car.

    5

    Put the replacement under-dash panels in place and reinstall the four screws. Reattach the glove box and lower steering wheel column cover. Reconnect the battery and close the hood.

Hot in Week

Popular

Archive

item