Dodge Van Brake Rotor Removal

Performing a brake job on your Dodge van may seem like a difficult task, but it is quite simple to do. The key is knowing what needs to be done and covering all the bases. For example, you need to replace the rotors, along with the pads, or have the stock ones turned at an auto parts store. This ensures that there's a smooth surface for the new brake pads to contact. In this case, the project vehicle is a 2000 Dodge Caravan, but the process is similar for other vehicles as well.

Instructions

1

Use a jack to lift the front end of the Caravan into the air then lower it down onto the jack stands. Remove the front tires and place them out of the way.

2

Unbolt the brake caliper adapter from the steering knuckle using a ratchet. Lift the assembly off of the rotor then hold it in one hand while looping the bungee cord around the spring on the front suspension with the other. Suspend the caliper from the bungee cord but make sure there is no tension on the brake line.

3

Remove the rotor retaining clips from the wheel lugs on the front of the rotor using the pliers. These aren't on every van and could have been removed previously. It's OK if they get damaged in the process of removing them as it's not crucial to reinstall them.

4

Lift the rotor straight off of the wheel studs using both hands.