How to Replace the Windshield on a Ford Taurus

Rock or stone chips are the most common causes of damage to a windshield. The Ford Taurus can be prone to this type of damage due to its rid...

Rock or stone chips are the most common causes of damage to a windshield. The Ford Taurus can be prone to this type of damage due to its ride height. This is especially true of older models of the Taurus, which were smaller than the current design and sat lower to the ground. Although replacing the windshield is a complex task, the design of the Taurus's front windshield makes it a pretty straightforward task.

Instructions

    1

    Pry up on the the plastic trim molding with a windshield trim removal tool. Wedge the teeth of the tool under the trim and pry up on it.

    2

    Cut the urethane molding around the outside of the glass with an automotive cutting knife.

    3

    Pull the windshield off.

    4

    Clean the Taurus frame where the new windshield will go. Make sure to remove the old urethane residue and trim the molding back to 3mm with a razor.

    5

    Slide the new rubber molding around the outer edge of the glass on the new windshield and fit the outer trim into the grooves on the rubber trim.

    6

    Apply a liberal amount of urethane primer to the frit band on the windshield. The frit band is the black strip running around the outside of the glass on the windshield.

    7

    Apply a bead of urethane to the recess on the frame where the windshield will be mounted.

    8

    Align the windshield on the frame and press the windshield into place. Allow the urethane to cure for 12 hours.

Hot in Week

Popular

Archive

item