How to Remove a CH150 Elite Oil Seal

Gas-powered scooters have become popular over the years largely due to fuel efficiency and easy maneuverability, especially in large, urban ...

Gas-powered scooters have become popular over the years largely due to fuel efficiency and easy maneuverability, especially in large, urban areas. The CH150 Elite is a scooter manufactured by Honda during the 1980s. Part of the regular maintenance routine for the CH150 includes changing the oil on a regular basis. The CH150 uses a screen and spring-type oil filter to clean oil as it circulates through the engine. When the oil is changed, the oil seal, which is a small O-ring connected to the oil filter, should be changed too.

Instructions

    1

    Run the scooter for a few moments to warm up the engine oil, which will help it to drain easier.

    2

    Park the scooter and slide the drain pan beneath the engine.

    3

    Use the socket set to remove the filter screen cap. Allow all the oil to drain into the pan.

    4

    Pull the spring and filter screen out by hand.

    5

    Pry the oil seal from around the rim of the hole that the filter screen cap screws into with a flat-head screwdriver.

Hot in Week

Popular

Archive

item