How to Install a Windshield in a 1994 Jeep Grand Cherokee

Windshield replacement on a 1994 Jeep Grand Cherokee may be needed because of cracks or chips, causing safety concerns or affecting the look of the windshield. The task can be completed with limited automotive repair knowledge and limited glass replacement experience. However, an assistant is necessary to help with removing and placing the new glass. Ensure that the new windshield is the same size and fit as the old windshield. The replacement can be done without visiting an authorized glass replacement center.

Instructions

1

Cover the dashboard with a tarp.

2

Remove the wiper arms and blades with a screwdriver.

3

Remove the rubber trim gasket around the windshield. Use a small screwdriver to pry the gasket out from the windshield.

4

Cut the adhesive holding the windshield to the frame with a box knife.

5

Remove the windshield from the 1994 Jeep Grand Cherokee with the help of an assistant.

6

Clean the mating surface on the Grand Cherokee, removing any gasket or adhesive material.

7

Sand the edges of the windshield that will come in contact with the exterior of the Grand Cherokee.

8

Spread a layer of silicon windshield adhesive on the mating surface of the Grand Cherokee.

9

Lay the windshield onto the Grand Cherokee with the help of an assistant.

10

Install the new windshield gasket by hand.

11

Reinstall the wiper arms and wiper blades.

12

Clean any excess adhesive or gasket material from the windshield.

13

Allow 24 hours for the adhesive to dry. Do not drive the Grand Cherokee during this time.