How to Change the Rear Brakes on a 2005 Ranger

The 2005 Ford Ranger came in both extended and regular cab. It was renowned for its 4.0-liter V6 engine that provided excellent acceleration. The Ranger incorporated disk brakes on all four wheels, which makes it much easier for the at-home mechanic to do brake changes. The brakes should be changed every 3 to 6 years, depending on the brand and quality of the brakes, as well as how frequently and rough you drive. If your brakes are squealing or grinding, it is time to change them.

Instructions

1

Loosen all of the lug nuts from on the rear tire using the tire iron. Place the wood blocks in front of the front end tires to ensure the Ranger won't inadvertently roll.

2

Place the floor jack beneath the axle of the truck and raise it until you have room to place the jack stand under the axle and remove the tire. Set the jack stand under the axle. Remove the loosened lug nuts and the tire.

3

Remove the caliper mounting bracket by unbolting it from the rotor with the socket wrench. Tie it to the undercarriage of the car with the twine, rope or wire to prevent strain on the brake line, which can damage it.

4

Remove the brake pads from the bracket. They should easily slip out by hand.

5

Compress the brake caliper cylinder with the C-clamp. Place an old brake pad against the cylinder for stability and compress it all the way down.

6

Install the new brake pads the same way that the old ones were removed.

7

Attach the mounting bracket back to the rotor with the socket wrench. Place the tire back on the wheel and hand-tighten the lug nuts. Lower the vehicle and tighten all of the lug nuts with the tire iron.