How to Replace My Combustion Engine

After enough wear and tear, an internal combustion engine must be replaced in order to keep the car functioning properly. Usually, this occurs after 150,000 miles. To replace the engine, you will need to carefully consider the different components and possibly work with an expert mechanic to insure that the job is done properly.

Instructions

1

Buy a factory made or re-manufactured engine that corresponds to your car's make and model. Use an engine hoist and stand to lift up the engine and rest on a seat to view the engine.

2

Disconnect the negative battery cable and detach the distributor cover, cap, the cooling fan, throttle links and the electrical harness. Unplug the fuel lines and empty leftover fuel. Note what each part is and where you place them.

3

Remove the power steering pump and alternator bolts. Take out both the coolant and heater hoses from the radiator as well as the AC compressor. Finally, disconnect the battery attached to the the compressor and pump.

4

Hoist up the engine and carefully remove the part with clamps. Raise the new engine up and position in the empty space.

5

Reattach all of the components that you removed in reverse order.