How to Install an HID in RX 300

The RX 300 is a luxury SUV produced by Lexus. Headlights are very important for safely operating your RX 300, as in any vehicle, but if you find that you have a difficult time seeing the road because the RX 300's headlights are not bright enough, consider installing high intensity discharge headlights. The HID headlight installation procedure is quick, simple and easily completed in just under half an hour with no extraneous tools.

Instructions

1

Open the RX 300's hood and locate the back section of the headlights you wish to replace. The outer headlights are the low beam headlights and the inner headlights are the high beams.

2

Rotate the desired bulb counterclockwise to loosen it, then pull it straight out. Pull the bulb out of the wiring harness, which is the brown plug directly below the bulb.

3

Install the HID bulb into the socket by rotating it clockwise. Plug the brown wiring harness into the blue HID plug. Insert the two wires from the HID bulb into the ballast plugs. Repeat on the other side of the RX 300. Close the hood when done.